Do you listen to a metallic noise on your Honda Insight once you drive? We know that this is not pleasurable and that you have questions. Hearing such a noise is not always a good signal, but it may also be nothing serious. To support you fix this trouble, we have decided to compose this content page to help you in this investigation. In order to execute this research as effectively as possible, we will first have a look at the plausible sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Honda Insight coming from the front end of the automobile
I notice a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Honda Insight, may be that one of your bearing is tired, it will tend to generate a loud noise that goes up when stressed (turns faster and faster). So bear in mind to examine by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Honda Insight, you will most likely find a solution to your trouble.
If you notice a metalic noise on Honda Insight and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your automobile on safety stand, and examine the state of your discs and pads by getting rid of the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your automobile, and you want explications about it, examine this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your Honda Insight, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To examine this, position yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we advise that you consult this content page for a complete guide about steering noises on Honda Insight.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Honda Insight. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, remember to examine their status and replace them if required. Feel free to browse this content page which is a complete file about strut mounts noises on Honda Insight, how to examine their state and swap them.
Finally, the last common reason of metallic noise on Honda Insight. It’s because your transmission system is the source. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we advise that you read this detailed guide on the sources of steering noises on Honda Insight.
Metallic noise Honda Insight coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the automobile, cold, and knock each of the previously stated components with a hammer to determine the source of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on replacing it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Honda Insight, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is plausible that with wear they are at the origin of your metallic noises on your Honda Insight. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the automobile.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
