If you too have already feel a grinding noise on Volkswagen Polo, you must have wondering the same questions as all Volkswagen Polo owners. We are rarely reassured when a grinding noise comes out on our car. As we are conscious of your uncertainties and questions, we have decided to write this article content to be able to assist you in and facilitate your investigation for a remedy to your problem. To do this, first we will see what the origins of a grinding noise on Volkswagen Polo are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Volkswagen Polo that comes from the shock absorbers and to finish from one of your doors.
I notice a grinding noise on Volkswagen Polo when I turn the wheel
First, we will have a look at the grinding noises on Volkswagen Polo that arise every time you turn the wheel of your car. Here are the main explanations for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may experience abnormal wear and tear on one of the seals. This would cause an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Volkswagen Polo
If you are subject to grinding noises on your Volkswagen Polo when you turn the wheels, it may be linked to the hydraulic system of your car that allows you to operate the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be a sign of a leak of the device. In this case, please remember to redo the level and verify it frequently. If the problem persists, go to your auto mechanic.
“A grinding noise on Volkswagen Polo when I turn the wheels of my car” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Bear in mind to verify their state.
Finally, a grinding noise on Volkswagen Polo when I turn may be relating to a tired steering pump power steering pump. The goal of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Bear in mind to verify that it is working properly.
If despite these different solutions you continue to notice a grinding noise on Volkswagen Polo when turning your steering wheel, we have made a complete content page on this subject that can help you find the origin.
I hear a grinding noise on Volkswagen Polo when braking
If you notice a grinding noise from the brakes of your Volkswagen Polo, it is highly possible that it will be linked with brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
If, despite crontrol, your grinding noise on Volkswagen Polo does come from your brakes but is not linked to the pads, verify this content page to find out the other possible sources of brake noises on Volkswagen Polo.
I notice a grinding noise on Volkswagen Polo at the shock absorbers
If you are in the scenario where you discover the grinding noise on Volkswagen Polo as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several explanations that can explain this noise. Indeed, you will have to verify some points, here they are:
at each compression.
Once you have checked out all these points, you should have found the source of your trouble, go to your technician to fix the malfunctioning component. If you have not identified the source of your problem, we encourage that you take a look at this content page which discusses all possible origins of shock absorber noise on Volkswagen Polo.
I notice a grinding noise on Volkswagen Polo at a door
If that’s not enough, don’t hesitate to read this complete content page on door sounds on Volkswagen Polo.
It is possible, depending on the type of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and checking out that
