If you too have already experience a grinding noise on Hyundai Genesis, you must have asked yourself the same questions as all Hyundai Genesis owners. We are rarely reassured when a grinding noise comes out on our car. As we are conscious of your doubts and questions, we have made a decision to prepare this article content to be able to assist you in and ease your search for a solution to your issue. To do this, first we will see what the sources of a grinding noise on Hyundai Genesis are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Hyundai Genesis that originates from the shock absorbers and to finish from one of your doors.
I experience a grinding noise on Hyundai Genesis every time I turn the wheel
First, we will look at the grinding noises on Hyundai Genesis that appear when ever you turn the wheel of your car. Here are the main causes for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Hyundai Genesis
If you are subject to grinding noises on your Hyundai Genesis every time you turn the wheels, it may be connected to the hydraulic system of your car that allows you to run the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the system. In this case, take into account to redo the level and verify it frequently. If the issue continues, go to your mechanic.
“A grinding noise on Hyundai Genesis every time I turn the wheels of my car” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Bear in mind to verify their condition.
Finally, a grinding noise on Hyundai Genesis every time I turn may be connected to a tired steering pump power steering pump. The objective of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may surface between it and the belt. Keep in mind to verify that it is working properly.
If despite these different possibilities you continue to encounter a grinding noise on Hyundai Genesis when turning your steering wheel, we have wrote a complete article content on this subject that can support you find the origin.
I notice a grinding noise on Hyundai Genesis every time braking
If you experience a grinding noise from the brakes of your Hyundai Genesis, it is highly conceivable that it will be related to brake pads at the end of their life, actually, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped as soon as possible because they will as soon as possible damage your discs.
If, despite check, your grinding noise on Hyundai Genesis does come from your brakes but is not connected to the pads, verify this article content to find out the other possible sources of brake noises on Hyundai Genesis.
I experience a grinding noise on Hyundai Genesis at the shock absorbers
If you are in the scenario where you discover the grinding noise on Hyundai Genesis as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several causes that can explain this noise. Indeed, you will have to verify some points, here they are:
at each compression.
Once you have checked all these elements, you should have found the origin of your trouble, go to your auto technician to fix the defective part. If you have not located the origin of your issue, we recommend highly that you look at this article content which discusses all possible origins of shock absorber noise on Hyundai Genesis.
I experience a grinding noise on Hyundai Genesis at a door
If that’s not enough, don’t hesitate to look at this full article content on door sounds on Hyundai Genesis.
It is possible, determined by the kind of of noise you note, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and checking out that
