If you too have already feel a grinding noise on Hyundai Tucson, you must have asked yourself the same questions as all Hyundai Tucson owners. We are rarely reassured when a grinding noise arises on our vehicle. As we are conscious of your fears and questions, we have decided to create this content page to be able to support you in and facilitate your quest for a answer to your issue. To do this, first we will see what the sources of a grinding noise on Hyundai Tucson are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Hyundai Tucson that comes from the shock absorbers and to finish from one of your doors.
I listen to a grinding noise on Hyundai Tucson once I turn the wheel
First, we will look into the grinding noises on Hyundai Tucson that happen when ever you turn the wheel of your vehicle. Here are the main explanations for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may experience abnormal wear and tear on one of the seals. This would trigger an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Hyundai Tucson
If you feel grinding noises on your Hyundai Tucson once you turn the wheels, it may be linked to the hydraulic system of your vehicle that allows you to run the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be a signal of a leak of the unit. In this case, remember to redo the level and verify it frequently. If the issue remains, go to your mechanic.
“A grinding noise on Hyundai Tucson once I turn the wheels of my vehicle” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Remember to verify their condition.
Finally, a grinding noise on Hyundai Tucson once I turn may be relating to a tired steering pump power steering pump. The task of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Bear in mind to verify that it is working properly.
If despite these different possibilities you continue to notice a grinding noise on Hyundai Tucson when turning your steering wheel, we have made a complete article content on this subject that can support you discover the origin.
I notice a grinding noise on Hyundai Tucson once braking
If you listen to a grinding noise from the brakes of your Hyundai Tucson, it is highly imaginable that it will be associated with brake pads at the end of their life, indeed, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and verify the wear indicator on them. If they are dead they will have to be changed as soon as possible because they will as soon as possible damage your discs.
If, despite crontrol, your grinding noise on Hyundai Tucson does come from your brakes but is not linked to the pads, verify this content page to find out the other plausible sources of brake noises on Hyundai Tucson.
I listen to a grinding noise on Hyundai Tucson at the shock absorbers
If you are in the scenario where you recognize the grinding noise on Hyundai Tucson as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several explanations that can explain this noise. In fact, you will have to verify some points, here they are:
at each compression.
Once you have tested all these elements, you should have found the origin of your issue, go to your mechanic to fix the malfunctioning component. If you have not located the origin of your issue, we suggest that you take a look at this content page which discusses all possible origins of shock absorber noise on Hyundai Tucson.
I listen to a grinding noise on Hyundai Tucson at a door
If that’s not enough, don’t hesitate to check out this full content page on door sounds on Hyundai Tucson.
It is plausible, determined by the type of noise you experience, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and checking out that
