If you too have already feel a grinding noise on Jeep Liberty, you must have wondering the same questions as all Jeep Liberty owners. We are rarely reassured when a grinding noise happens on our car. As we are conscious of your fears and questions, we have decided to produce this content to be able to support you in and facilitate your quest for a answer to your problem. To do this, first we will see what the origins of a grinding noise on Jeep Liberty are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Jeep Liberty that originates from the shock absorbers and to finish from one of your doors.grinding-noise-jeep-liberty

I acknowledge a grinding noise on Jeep Liberty when I turn the wheel

First, we will check out the grinding noises on Jeep Liberty that take place once you turn the wheel of your car. Here are the main reasons for this:

  • Hydraulic system

    • If you notice grinding noises on your Jeep Liberty when you turn the wheels, it may be relating to the hydraulic system of your car that allows you to run the entire power steering part. In this instance, the main point to examine is the power steering fluid level, which if below the normal level could be a sign of a leak of the device. In this case, please remember to redo the level and examine it frequently. If the problem lasts, go to your auto mechanic.

  • Bearings

    • “A grinding noise on Jeep Liberty when I turn the wheels of my car” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Think about to examine their state.

  • Steering pump

    • Finally, a grinding noise on Jeep Liberty when I turn may be associated with a tired steering pump power steering pump. The goal of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Keep in mind to examine that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Jeep Liberty when turning your steering wheel, we have wrote a complete article on this subject that can support you find the origin.

    I hear a grinding noise on Jeep Liberty when braking

    If you acknowledge a grinding noise from the brakes of your Jeep Liberty, it is highly conceivable that it will be related to brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and examine the wear indicator on them. If they are dead they will have to be replaced as soon as possible because they will as soon as possible damage your discs.
    If, despite verification, your grinding noise on Jeep Liberty does come from your brakes but is not relating to the pads, examine this content to find out the other plausible origins of brake noises on Jeep Liberty.

    I acknowledge a grinding noise on Jeep Liberty at the shock absorbers

    If you are in the situation where you discern the grinding noise on Jeep Liberty as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several reasons that can justify this noise. In fact, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Jeep Liberty

    at each compression.
    Once you have checked all these elements, you should have found the source of your issue, go to your technician to repair the malfunctioning component. If you have not found the source of your problem, we suggest that you look at this content which discusses all possible origins of shock absorber noise on Jeep Liberty.

    I acknowledge a grinding noise on Jeep Liberty at a door

    If that’s not enough, don’t hesitate to check out this full content on door sounds on Jeep Liberty.
    It is plausible, determined by the type of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and checking that the grinding noise on your Jeep Liberty comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete content on door sounds on Jeep Liberty.