It occurs occasionally that your car makes noises from your brakes, you are rarely reassured by this sorts of noise and you immediately tend to think that you will have an accident or that the repair will cost you an astronomical amount. So, what if you detect noise from the brake on your Mercedes Benz CLS Class? It may not be anything severe and you should have the capability to repair it on your own, but when in doubt, as with such issue your safety and the one from other is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to create this document and give you the chance to locate the issue and find a solution. We will go through different steps, review all possible sources of brake noise on Mercedes Benz CLS Class, and deliver you the reasons for them in order to support you solve the issue.
The different types of brake noise Mercedes Benz CLS Class and their origins
The objective of the Mercedes Benz CLS Class brakes is to come slow down and stop your car. This component is an fundamental part of your vehicule’s safety. Hearing a sound from it must therefore be looked into right away and leaving it lying around is not a good alternative.
I listen a grinding noise on my brake Mercedes Benz CLS Class
If you listen to a grinding or scrap metal noise coming from the brake of your Mercedes Benz CLS Class, it is highly conceivable that it will be caused by brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Mercedes Benz CLS Class. If after looking at this point, you’re still having a grinding noise on your Mercedes Benz CLS Class, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake with my Mercedes Benz CLS Class
If you experience a regular noise from the brakes Mercedes Benz CLS Class that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. In fact, they can jam over time, especially if they are not employed enough. In this case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake many times frankly to try to unblock them. If this does not work, it will be necessary to reflect on changing them.
I encounter vibration when I brake with my Mercedes Benz CLS Class
If in your situation, you encounter a vibration when braking that would have come from the brake your Mercedes Benz CLS Class, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto mechanic.
I experience a squealing noise when I brake with my Mercedes Benz CLS Class
Finally, if you notice a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mercedes Benz CLS Class, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
