In some cases your vehicle can make noises in the front axle, you are very rarely reassured by this kind of noise and you right away tend to presume that you will lose a wheel or that the fix will cost you an massive amount. So, what if you detect a noise coming from the front end of your GMC Canyon? It may not be much and you can resolve the problem yourself, but if in doubt it is better to check before a larger damage happens. It is with this in mind that we have chosen to write this article and allow you to discover the problem and find a solution. We will, through some steps review all the components that can create noises at the front end of your GMC Canyon. 
What are the elements that can cause front axle noise GMC Canyon?
Most of our job will focus on finding the element that gives your GMC Canyon front wheel noise. The following is a list of the components that are most likely to be generating it and how to confirm it.
Noise vibration front end GMC Canyon : the shock absorber cup
One of the most classic causes of symptoms on your GMC Canyon front axle noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the problem that worries you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about changing them quickly as this may affect other components and require more pricey repairs.
Noise while turning front end GMC Canyon : stabilizer bar
If you detect of a noise on your GMC Canyon at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is malfunctioning. To confirm the origin of the problem, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front axle noise when turning GMC Canyon : direction triangles
Finally, you may have a noise in the front wheel on your GMC Canyon, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud noise front end GMC Canyon : bearings
One of the other probable origins of symptoms of the front axle of your GMC Canyon, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only happens with an engaged speed, read our article on loud noise on GMC Canyon, you will probably find a response to your problem.
Front end noise squeaking GMC Canyon : cardan shaft
One of the most traditional causes when noise happens on the front axle of your GMC Canyon when you turn with your vehicle is in connection with the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on GMC Canyon, do not hesitate to consult this article to find the solution to your problem.
