Being subject to repeated noise on your automobile tends to be disturbing, a automobile is so complex that it is constantly difficult to locate its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Honda Ridgeline, we will most likely be able to support you. In fact, our editorial staff decided to write this article in order to review the main causes of a clicking noise on Honda Ridgeline. This is why, firstly, we will check out what are the causes of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Honda Ridgeline coming from your suspensions.
I discover a clicking noise on Honda Ridgeline from my engine
Verify your high engine
If you discover a clicking noise on Honda Ridgeline, and this noise is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two parts can be the causes of these ticking noises on Honda Ridgeline. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will find out these clicking noises, generally when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this case, remember to change them.
Verify your low engine
If you have founded the zone of origin of the Honda Ridgeline clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both situations, the risk in the long term is the breakage of the motor. These two fixes are very complicated and most mechanics will advise you to replace the engine of your Honda Ridgeline.
Combustion problem
Finally, if you have the feeling that this clicking noise on Honda Ridgeline is related to the combustion of your engine, there are three possible origins of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are destroyed. In this case, do not hesitate to read this article which deals in detail with the different injection sounds on Honda Ridgeline.
I discover a clicking noise on Honda Ridgeline in my direction
Verify the condition of the gimbals
One of the most basic reasons of a clicking noises in the direction of your Honda Ridgeline is linked with the direction of the automobile. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will affect the cardan shaft very quickly and must be swapped in a short time, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Honda Ridgeline, do not hesitate to consult this complete guide.
Verify the rest of your direction
Finally, when you detect a clicking noise on your Honda Ridgeline, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I discover a clicking noise on Honda Ridgeline coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Honda Ridgeline each time you pass a speed bump, it is extremely possible that your suspension block is the induce of the noise. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To examine if this is the issue that worries you, take a dented road and, at low speed, listen to the noise originating from your front axle when ever you pass over holes. If these are the cups, consider changing them soon as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you notice a clicking noise on your Honda Ridgeline at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a explanation. To examine the condition of the spring, place the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too large it suggests that that most likely your springs are worn, if you see a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider changing it or them. If you have the feeling that this noise is more like a squeaking noise on Honda Ridgeline than a clicking noise, don’t hesitate to consult this article.
