Being subject to recurring noise on your car tends to be disturbing, a car is so elaborate that it is usually difficult to locate its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Dodge Avenger, we will most likely be able to help you. In fact, our editorial staff decided to write this article in order to review the main causes of a clicking noise on Dodge Avenger. This is why, firstly, we will look at what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Dodge Avenger coming from your suspensions.clicking-noise-dodge-avenger

I notice a clicking noise on Dodge Avenger on my engine

Verify your high engine

If you notice a clicking noise on Dodge Avenger, and this noise is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two parts can be the triggers of these ticking noises on Dodge Avenger. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will find out these clicking noises, often when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this situation, remember to change them.

Verify your low engine

If you have distinguished the zone of origin of the Dodge Avenger clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both circumstances, the risk in the long term is the breakage of the motor. These two repairs are very complex and most mechanics will suggest you to swap the engine of your Dodge Avenger.

Combustion problem

Finally, if you have the feeling that this clicking noise on Dodge Avenger is in connection with the combustion of your engine, there are three possible origins of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic cause, comes from your injection, which is either blocked or one or more injectors are injured. In this circumstance, do not hesitate to check this article which deals in detail with the different injection sounds on Dodge Avenger.

I notice a clicking noise on Dodge Avenger in my direction

Verify the condition of the gimbals

One of the most common triggers of a clicking noises in the direction of your Dodge Avenger is associated with the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can make a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be swapped rapidly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Dodge Avenger, do not hesitate to read this complete guide.

Verify the rest of your direction

Finally, when you detect a clicking noise on your Dodge Avenger, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.

I notice a clicking noise on Dodge Avenger coming from my suspensions

Verify the suspension

If you encounter a clicking noise on your Dodge Avenger each time you pass a speed bump, it is highly conceivable that your suspension block is the reason of the noise. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To examine if this is the problem that worries you, take a dented road and, at low speed, listen to the noise coming from your front axle when you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.

Check spring and cylinder

If you detect a clicking noise on your Dodge Avenger at the suspension level, it is widely conceivable that spring wear or shock cylinder deformation may be a reason. To examine the shape of the spring, place the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too large it suggests that that most likely your springs are worn, if you discover a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Dodge Avenger than a clicking noise, don’t hesitate to consult this article.