Being subject to constant noise on your car tends to be annoying, a car is so sophisticated that it is usually difficult to situate its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Ford Taurus, we will almost certainly be able to help you. Indeed, our editorial staff decided to write this document in order to review the main causes of a clicking noise on Ford Taurus. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Ford Taurus coming from your suspensions.
I notice a clicking noise on Ford Taurus on my engine
Verify your high engine
If you notice a clicking noise on Ford Taurus, and this sound is based at the top of the engine, it means that it comes from your cylinder head and its accompanying parts. Two parts can be the triggers of these ticking noises on Ford Taurus. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this situation, remember to change them.
Verify your low engine
If you have founded the spot of source of the Ford Taurus clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two repairs are very complicated and most mechanics will recommend you to change the engine of your Ford Taurus.
Combustion problem
Finally, if you have the feeling that this clicking noise on Ford Taurus is in connection with the combustion of your engine, there are three possible causes of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic cause, comes from your injection, which is either blocked or one or more injectors are destroyed. In this case, do not hesitate to check this document which deals in detail with the different injection sounds on Ford Taurus.
I notice a clicking noise on Ford Taurus in my direction
Verify the condition of the gimbals
One of the most common triggers of a clicking noises in the direction of your Ford Taurus is linked with the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be changed in a short time, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Ford Taurus, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you experience a clicking noise on your Ford Taurus, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I notice a clicking noise on Ford Taurus coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Ford Taurus when you pass a speed bump, it is highly possible that your suspension block is the cause of the sound. Indeed, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To verify if this is the issue that worries you, take a dented road and, at low speed, focus on the sound coming from your front axle when ever you pass over holes. If these are the cups, consider changing them soon as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you detect a clicking noise on your Ford Taurus at the suspension level, it is widely possible that spring wear or shock cylinder deformation may be a explanation. To verify the state of the spring, place the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too large it means that most likely your springs are worn, if you discover a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider replacing it or them. If you have the feeling that this noise is more like a squeaking noise on Ford Taurus than a clicking noise, don’t hesitate to consult this article.
