Being subject to constant noise on your car tends to be annoying, a car is so elaborate that it is constantly difficult to locate its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Nissan Rogue, we will most likely be able to help you. In fact, our editorial staff decided to create this article in order to review the main causes of a clicking noise on Nissan Rogue. This is why, firstly, we will look at what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Nissan Rogue coming from your suspensions.
I listen to a clicking noise on Nissan Rogue from my engine
Examine your high engine
If you listen to a clicking noise on Nissan Rogue, and this sound is located at the top of the engine, it means that it originates from your cylinder head and its associated parts. Two parts can be the causes of these ticking noises on Nissan Rogue. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, generally when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this circumstance, remember to change them.
Examine your low engine
If you have distinguished the spot of source of the Nissan Rogue clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both situations, the risk in the long term is the breakage of the motor. These two repairs are very complicated and most mechanics will advise you to change the engine of your Nissan Rogue.
Combustion problem
Finally, if you have the feeling that this clicking noise on Nissan Rogue is connected to the combustion of your engine, there are three possible origins of it. Examine the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are destroyed. In this case, do not hesitate to read this article which deals in detail with the different injection sounds on Nissan Rogue.
I listen to a clicking noise on Nissan Rogue in my direction
Examine the state of the gimbals
One of the most basic reasons of a clicking noises in the direction of your Nissan Rogue is associated with the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be changed rapidly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Nissan Rogue, do not hesitate to read this complete guide.
Examine the rest of your direction
Finally, when you experience a clicking noise on your Nissan Rogue, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I listen to a clicking noise on Nissan Rogue coming from my suspensions
Examine the suspension
If you experience a clicking noise on your Nissan Rogue once you pass a speed bump, it is highly conceivable that your suspension block is the induce of the sound. In fact, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented road and, at low speed, listen to the sound coming from your front axle when ever you pass over holes. If these are the cups, consider changing them soon as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you detect a clicking noise on your Nissan Rogue at the suspension level, it is widely conceivable that spring wear or shock cylinder deformation may be a explanation. To check the shape of the spring, position the car on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it denotes that most likely your springs are worn, if you observe a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Nissan Rogue than a clicking noise, don’t hesitate to consult this article.
