You perceive a starter motor noise on your Peugeot 106 each time you start your car. We can understand that this is not pleasant and that you have questions. Listening such a noise is not always a good signal, but it may also be nothing severe. To assist you fix this problem, our team has decided to write this article content to help you in this research. First, we will detail how the starter motor functions on your Peugeot 106, and then what starter motor noises you can notice on your Peugeot 106.
Functioning and various information
Function of a starter motor on Peugeot 106
The starter motor is an electric motor whose sole function is to start the engine of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 106 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Peugeot 106
- Do not run your starter too long
- Do not use a starter motor on Peugeot 106 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be good enough to give the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not fix the origin of your failure to start repeatedly, your starter may be the future component you will have to replace.
I perceive noises from the starter motor of my Peugeot 106, what are the triggers?
I feel a loud noise from the starter of my Peugeot 106
If you experience a starter motor noise on Peugeot 106 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is responsible of the starter motor noise on your Peugeot 106 replace it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, check this article content about front end noise on Peugeot 106 which may offer you other leads to solve your noise problem.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 106
If you perceive a clicking noise at the starter motor of your Peugeot 106, there are two possible failures connected to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a problem with unplugged cable check your electrical installation. If after examining this clicking noise on Peugeot 106 doesn’t come from your starter motor, check this article for more informations.
