You acknowledge a starter motor noise on your Ford C-max when you start your vehicle. We agree that this is not enjoyable and that you have inquiries. Finding out such a noise is not always a good indication, but it may also be nothing major. To support you remedy this trouble, our team has chosen to prepare this article to help you in this research. First, we will detail how the starter motor works on your Ford C-max, and then what starter motor noises you can know on your Ford C-max.
Functioning and various information
Function of a starter motor on Ford C-max
The starter motor is an electric motor whose single role is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford C-max is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Ford C-max
- Do not run your starter too long
- Do not use a starter motor on Ford C-max with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your car, the energy it is capable of holding may not be sufficient to provide the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the trigger of your failure to start repeatedly, your starter may be the future component you will have to change.
I acknowledge noises from the starter motor of my Ford C-max, what are the causes?
I encounter a loud noise from the starter of my Ford C-max
If you perceive a starter motor noise on Ford C-max and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Ford C-max swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this article about front end noise on Ford C-max which may give you other leads to resolve your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford C-max
If you acknowledge a clicking noise at the starter motor of your Ford C-max, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a trouble with unplugged cable verify your electrical installation. If after examining this clicking noise on Ford C-max doesn’t come from your starter motor, check this article for more informations.
