You perceive a starter motor noise on your Citroen Xantia once you start your car. We can understand that this is not enjoyable and that you have questions. Hearing such a noise is not always a good indication, but it may also be nothing major. To support you solve this problem, our team has chosen to prepare this article to assist you in this research. First, we will describe how the starter motor functions on your Citroen Xantia, and then what starter motor noises you can know on your Citroen Xantia.
Functioning and various information
Function of a starter motor on Citroen Xantia
The starter motor is an electric motor whose sole role is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Citroen Xantia is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Citroen Xantia
- Do not try to start your engine for too long
- Do not use a starter motor on Citroen Xantia with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be good enough to furnish the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not solve the cause of your failure to start repeatedly, your starter may be the future component you will have to swap.
I perceive noises from the starter motor of my Citroen Xantia, what are the origins?
I feel a loud noise from the starter of my Citroen Xantia
If you listen to a starter motor noise on Citroen Xantia and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the component resposible of the starter motor noise on your Citroen Xantia replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, check this article about front end noise on Citroen Xantia which may give you other leads to solve your noise problem.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Citroen Xantia
If you perceive a clicking noise at the starter motor of your Citroen Xantia, there are two possible failures connected to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a problem with unplugged cable check your electrical installation. If after checking this clicking noise on Citroen Xantia doesn’t come from your starter motor, check this article for more informations.
