You listen to a starter motor noise on your Chevrolet Spark once you start your car. We can understand that this is not agreeable and that you have inquiries. Experiencing such a sound is not always a good sign, but it may also be nothing major. To help you solve this issue, our team has decided to write this content page to help you in this research. First, we will explain how the starter motor works on your Chevrolet Spark, and then what starter motor noises you can notice on your Chevrolet Spark.
Functioning and various information
Function of a starter motor on Chevrolet Spark
The starter motor is an electric motor whose single job is to start the engine of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Spark is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Chevrolet Spark
- Do not try to start your engine for too long
- Do not use a starter motor on Chevrolet Spark with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be good enough to generate the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not fix the origin of your failure to start repeatedly, your starter may be the future element you will have to swap.
I listen to noises from the starter motor of my Chevrolet Spark, what are the reasons?
I encounter a loud noise from the starter of my Chevrolet Spark
If you listen to a starter motor noise on Chevrolet Spark and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the component resposible of the starter motor noise on your Chevrolet Spark swap it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, consult this content page about front end noise on Chevrolet Spark which may offer you other leads to remedy your noise issue.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Spark
If you listen to a clicking noise at the starter motor of your Chevrolet Spark, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a issue with unplugged cable examine your electrical installation. If after tracking this clicking noise on Chevrolet Spark doesn’t come from your starter motor, check this article for more informations.
