You acknowledge a starter motor noise on your Mazda Mx5 each time you start your car. We can understand that this is not pleasant and that you have inquiries. Finding out such a sound is not always a good sign, but it may also be nothing serious. To support you resolve this problem, our team has decided to compose this content page to assist you in this research. First, we will detail how the starter motor works on your Mazda Mx5, and then what starter motor noises you can notice on your Mazda Mx5.
Functioning and various information
Function of a starter motor on Mazda Mx5
The starter motor is an electric motor whose sole function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mazda Mx5 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Mazda Mx5
- Do not run your starter too long
- Do not use a starter motor on Mazda Mx5 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your car, the energy it is capable of holding may not be enough to give the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not correct the reason of your failure to start repeatedly, your starter may be the future component you will have to swap.
I acknowledge noises from the starter motor of my Mazda Mx5, what are the triggers?
I feel a loud noise from the starter of my Mazda Mx5
If you experience a starter motor noise on Mazda Mx5 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which circumstance the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is the element responsible of the starter motor noise on your Mazda Mx5 swap it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, read this content page about front end noise on Mazda Mx5 which may give you other leads to fix your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Mazda Mx5
If you acknowledge a clicking noise at the starter motor of your Mazda Mx5, there are two possible failures related to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a problem with unplugged cable verify your electrical installation. If after checking out this clicking noise on Mazda Mx5 doesn’t come from your starter motor, check this article for more informations.
