You perceive a starter motor noise on your Hyundai Kona when you start your car. We agree that this is not pleasant and that you have questions. Discovering such a sound is not always a good signal, but it may also be nothing significant. To help you fix this trouble, our team has chosen to write this content page to help you in this research. First, we will detail how the starter motor functions on your Hyundai Kona, and then what starter motor noises you can experience on your Hyundai Kona.
Functioning and various information
Function of a starter motor on Hyundai Kona
The starter motor is an electric motor whose single task is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Hyundai Kona is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Hyundai Kona
- Do not try to start your engine for too long
- Do not use a starter motor on Hyundai Kona with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to provide the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future part you will have to change.
I perceive noises from the starter motor of my Hyundai Kona, what are the triggers?
I experience a loud noise from the starter of my Hyundai Kona
If you hear a starter motor noise on Hyundai Kona and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the component resposible of the starter motor noise on your Hyundai Kona replace it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, consult this content page about front end noise on Hyundai Kona which may provide you other leads to resolve your noise trouble.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Hyundai Kona
If you perceive a clicking noise at the starter motor of your Hyundai Kona, there are two possible failures connected to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a trouble with unplugged cable verify your electrical installation. If after checking out this clicking noise on Hyundai Kona doesn’t come from your starter motor, check this article for more informations.
