You listen to a starter motor noise on your Fiat Doblo Cargo each time you start your automobile. We agree that this is not enjoyable and that you have questions. Experiencing such a sound is not always a good indication, but it may also be nothing serious. To assist you resolve this issue, our team has decided to prepare this article content to help you in this research. First, we will describe how the starter motor functions on your Fiat Doblo Cargo, and then what starter motor noises you can notice on your Fiat Doblo Cargo.
Functioning and various information
Function of a starter motor on Fiat Doblo Cargo
The starter motor is an electric motor whose single function is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat Doblo Cargo is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Fiat Doblo Cargo
- Do not run your starter too long
- Do not use a starter motor on Fiat Doblo Cargo with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to generate the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not correct the trigger of your failure to start repeatedly, your starter may be the future element you will have to change.
I listen to noises from the starter motor of my Fiat Doblo Cargo, what are the reasons?
I encounter a loud noise from the starter of my Fiat Doblo Cargo
If you experience a starter motor noise on Fiat Doblo Cargo and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which case the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Fiat Doblo Cargo swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this article content about front end noise on Fiat Doblo Cargo which may offer you other leads to resolve your noise issue.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat Doblo Cargo
If you listen to a clicking noise at the starter motor of your Fiat Doblo Cargo, there are two possible failures associated with this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a issue with unplugged cable check your electrical installation. If after looking at this clicking noise on Fiat Doblo Cargo doesn’t come from your starter motor, check this article for more informations.
