You hear a starter motor noise on your Bmw Serie 1 F20 every time you start your car. We can understand that this is not pleasant and that you have questions. Hearing such a noise is not always a good sign, but it may also be nothing severe. To assist you remedy this issue, our team has decided to produce this article to assist you in this research. First, we will describe how the starter motor functions on your Bmw Serie 1 F20, and then what starter motor noises you can know on your Bmw Serie 1 F20.
Functioning and various information
Function of a starter motor on Bmw Serie 1 F20
The starter motor is an electric motor whose sole job is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Bmw Serie 1 F20 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Bmw Serie 1 F20
- Do not run your starter too long
- Do not use a starter motor on Bmw Serie 1 F20 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be enough to provide the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not fix the cause of your failure to start repeatedly, your starter may be the future component you will have to replace.
I hear noises from the starter motor of my Bmw Serie 1 F20, what are the origins?
I experience a loud noise from the starter of my Bmw Serie 1 F20
If you listen to a starter motor noise on Bmw Serie 1 F20 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is responsible of the starter motor noise on your Bmw Serie 1 F20 change it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, consult this article about front end noise on Bmw Serie 1 F20 which may offer you other leads to eliminate your noise issue.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Bmw Serie 1 F20
If you hear a clicking noise at the starter motor of your Bmw Serie 1 F20, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a issue with unplugged cable examine your electrical installation. If after checking this clicking noise on Bmw Serie 1 F20 doesn’t come from your starter motor, check this article for more informations.
