Occasionally your automobile can make noises in the front axle, you are very rarely reassured by this types of noise and you automatically tend to think that you will lose a wheel or that the fix will cost you an astronomical amount. So, what if you detect a noise coming from the front end of your Lancia Ypsilon? It may not be much and you can correct the issue yourself, but if in doubt it is better to verify before a larger troubles takes place. It is with this in mind that we have chosen to compose this content and allow you to discover the issue and find a treatment. We will, through several steps review all the components that can generate noises at the front end of your Lancia Ypsilon. 
What are the elements that can cause front axle noise Lancia Ypsilon?
Most of our job will focus on finding the element that gives your Lancia Ypsilon front wheel noise. The following is a list of the components that are most likely to be causing it and how to validate it.
Noise vibration front end Lancia Ypsilon : the shock absorber cup
One of the most likely reason of symptoms on your Lancia Ypsilon front axle noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them quickly as this may damage other parts and require more costly repairs.
Noise while turning front end Lancia Ypsilon : stabilizer bar
If you find out of a noise on your Lancia Ypsilon at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is faulty. To validate the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Front axle noise when turning Lancia Ypsilon : direction triangles
Finally, you may have a noise in the front wheel on your Lancia Ypsilon, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your mechanic.
Loud noise front end Lancia Ypsilon : bearings
One of the other probable causes of symptoms of the front axle of your Lancia Ypsilon, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So you should verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noise on Lancia Ypsilon, you will most certainly find a response to your issue.
Front end noise squeaking Lancia Ypsilon : cardan shaft
One of the most traditional causes when noise shows up on the front axle of your Lancia Ypsilon when you turn with your vehicle is in connection with the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Lancia Ypsilon, do not hesitate to consult this article to find the solution to your problem.
