On occasion your car can make noises in the front axle, you are very almost never reassured by this kind of noise and you immediately tend to presume that you will lose a wheel or that the fix will cost you an huge sum. Then, what if you discern a noise coming from the front end of your Alfa Romeo Mito? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to examine before a larger failure appears. It is with this in mind that we have chosen to make this article and allow you to find the trouble and find a treatment. We will, through several steps review all the components that can produce noises at the front end of your Alfa Romeo Mito. 
What are the elements that can cause front axle noise Alfa Romeo Mito?
Most of our job will focus on finding the element that gives your Alfa Romeo Mito front wheel noise. The following is a list of the components that are most likely to be generating it and how to confirm it.
Noise vibration front end Alfa Romeo Mito : the shock absorber cup
One of the most common reason of symptoms on your Alfa Romeo Mito front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To examine if this is the trouble that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.
Noise while turning front end Alfa Romeo Mito : stabilizer bar
If you detect of a noise on your Alfa Romeo Mito at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is malfunctioning. To confirm the origin of the trouble, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Alfa Romeo Mito : direction triangles
Finally, you may have a noise in the front wheel on your Alfa Romeo Mito, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this trouble comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also examine the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your technician.
Loud noise front end Alfa Romeo Mito : bearings
One of the other probable causes of symptoms of the front axle of your Alfa Romeo Mito, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure you examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only happens with an engaged speed, check out our article on loud noise on Alfa Romeo Mito, you will probably find a response to your trouble.
Front end noise squeaking Alfa Romeo Mito : cardan shaft
One of the most traditional causes when noise happens on the front axle of your Alfa Romeo Mito when you turn with your vehicle is linked to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Alfa Romeo Mito, do not hesitate to consult this article to find the solution to your problem.
