In some cases your automobile can make noises in the front axle, you are very hardly ever reassured by this sort of noise and you right away tend to presume that you will lose a wheel or that the fix will cost you an astronomical amount. Then, what if you discern a noise coming from the front end of your BENTLEY CONTINENTAL ? It may not be much and you can repair the issue yourself, but if in doubt it is better to verify before a larger troubles occurs. It is with this in mind that we have decided to compose this article and allow you to find out the issue and find a treatment. We will, through several steps review all the elements that can make noises at the front end of your BENTLEY CONTINENTAL . 
What are the elements that can cause front axle noise BENTLEY CONTINENTAL ?
Most of our work will focus on finding the element that gives your BENTLEY CONTINENTAL front wheel noise. The following is a list of the components that are most likely to be making it and how to verify it.
Noise vibration front end BENTLEY CONTINENTAL : the shock absorber cup
One of the most classic reason of symptoms on your BENTLEY CONTINENTAL front axle noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them soon as this may damage other parts and require more costly repairs.
Noise while turning front end BENTLEY CONTINENTAL : stabilizer bar
If you find out of a noise on your BENTLEY CONTINENTAL at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is malfunctioning. To verify the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning BENTLEY CONTINENTAL : direction triangles
Finally, you may have a noise in the front wheel on your BENTLEY CONTINENTAL , when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.
Loud noise front end BENTLEY CONTINENTAL : bearings
One of the other possible origins of symptoms of the front axle of your BENTLEY CONTINENTAL , may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So you should verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them soon. If, on the other hand, this noise only shows up with an engaged speed, consult our article on loud noise on BENTLEY CONTINENTAL , you will certainly find a fix to your issue.
Front end noise squeaking BENTLEY CONTINENTAL : cardan shaft
One of the most traditional causes when noise shows up on the front axle of your BENTLEY CONTINENTAL when you turn with your vehicle is connected to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on BENTLEY CONTINENTAL , do not hesitate to consult this article to find the solution to your problem.
