On occasion your vehicle can make noises in the front axle, you are very almost never reassured by this sort of noise and you immediately tend to think that you will lose a wheel or that the repair will cost you an massive amount. So, what if you recognize a noise coming from the front end of your Volvo V50? It may not be much and you can correct the issue yourself, but if in doubt it is better to check before a larger problem occurs. It is with this in mind that we have decided to compose this article and allow you to find out the issue and find a solution. We will, through different steps review all the elements that can produce noises at the front end of your Volvo V50. 
What are the elements that can cause front axle noise Volvo V50?
Most of our work will focus on finding the element that gives your Volvo V50 front wheel noise. The following is a list of the components that are most likely to be generating it and how to validate it.
Noise vibration front end Volvo V50 : the shock absorber cup
One of the most classic causes of symptoms on your Volvo V50 front axle noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about changing them quickly as this may damage other components and require more pricey repairs.
Noise while turning front end Volvo V50 : stabilizer bar
If you recognise of a noise on your Volvo V50 at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is faulty. To validate the origin of the issue, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Volvo V50 : direction triangles
Finally, you may have a noise in the front wheel on your Volvo V50, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your technician.
Loud noise front end Volvo V50 : bearings
One of the other probable causes of symptoms of the front axle of your Volvo V50, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So you should check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only appears with an engaged speed, refer to our article on loud noise on Volvo V50, you will most certainly find a response to your issue.
Front end noise squeaking Volvo V50 : cardan shaft
One of the most common causes when noise appears on the front axle of your Volvo V50 when you turn with your automobile is linked to the direction of your automobile. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Volvo V50, do not hesitate to consult this article to find the solution to your problem.
