Sometimes your automobile can make noises in the front axle, you are very almost never reassured by this sorts of noise and you automatically tend to think that you will lose a wheel or that the repair will cost you an massive sum. Thus, what if you discern a noise coming from the front end of your Peugeot Rifter? It may not be much and you can resolve the problem yourself, but if in doubt it is better to examine before a larger troubles occurs. It is with this in mind that we have chosen to write this content and allow you to locate the problem and find a solution. We will, through several steps review all the components that can create noises at the front end of your Peugeot Rifter. 
What are the elements that can cause front axle noise Peugeot Rifter?
Most of our job will focus on finding the element that gives your Peugeot Rifter front wheel noise. The following is a list of the components that are most likely to be producing it and how to validate it.
Noise vibration front end Peugeot Rifter : the shock absorber cup
One of the most common reason of symptoms on your Peugeot Rifter front axle noise is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them promptly as this may damage other parts and require more pricey repairs.
Noise while turning front end Peugeot Rifter : stabilizer bar
If you recognise of a noise on your Peugeot Rifter at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To validate the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Peugeot Rifter : direction triangles
Finally, you may have a noise in the front wheel on your Peugeot Rifter, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.
Loud noise front end Peugeot Rifter : bearings
One of the other likely causes of symptoms of the front axle of your Peugeot Rifter, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them promptly. If, on the other hand, this noise only appears with an engaged speed, consult our article on loud noise on Peugeot Rifter, you will most certainly find a fix to your problem.
Front end noise squeaking Peugeot Rifter : cardan shaft
One of the most traditional causes when noise appears on the front axle of your Peugeot Rifter when you turn with your car is related to the direction of your car. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Peugeot Rifter, do not hesitate to consult this article to find the solution to your problem.
