In some cases your automobile can make noises in the front right, you are very rarely reassured by this sorts of noise and you automatically start to presume that you will loose a wheel or that the repair will cost you an huge sum. So, what if you recognize a noise coming from the front right of your Peugeot 3008? It may not be much and you can fix the problem yourself, but if in doubt it is better to verify before a larger problem happens. It is with this in mind that we have decided to compose this document and allow you to find the problem and find a treatment. We will, through different steps review all the components that can produce noises at the front right of your Peugeot 3008. front-right-noise-peugeot-3008

What are the parts that can generate front right noise Peugeot 3008?

Most of our article will concentrate on finding the part that gives your Peugeot 3008 front wheel noise. The following is a list of the elements that are most likely to be creating it and how to verify it.

Grinding noise front right wheel Peugeot 3008 : the shock absorber cup

One of the most common causes of symptoms on your Peugeot 3008 front right wheel noise is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its purpose and during small jolts that compress the suspension systems. To verify if this is the problem that worries you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, think about changing them quickly as this may affect other components and require more pricey repairs.

Noise while turning front right Peugeot 3008 : stabilizer bar

If you detect a noise when turning on your front right wheel Peugeot 3008 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the elements of your stabilizer bar that is defective. To verify the source of the problem, you may find a lack of balance in the direction of the car (it pulls to the right or it pulls to the right). Moreover, you can position yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.

Front right noise when turning Peugeot 3008 : direction triangles

Finally, you may have a noise in the front right wheel on your Peugeot 3008, when you accelerate, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.

Loud knocking or grinding noise front right Peugeot 3008 : bearings

One of the other possible causes of symptoms of the front right grinding or knocking noise on your Peugeot 3008, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So remember to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noises on Peugeot 3008, you will certainly find a solution to your problem.

Front right wheel noise squeaking Peugeot 3008 : cardan shaft

One of the most common causes when noise shows up on the front right of your Peugeot 3008 when you turn with your car is linked to the direction of your car. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Peugeot 3008, do not hesitate to consult this article to find the solution to your problem.