In some cases your automobile can generate sounds in the front right, you are very almost never reassured by this sort of noise and you directly start to think that you will loose a wheel or that the repair will cost you an astronomical amount. Then, what if you detect a noise coming from the front right of your Ford S-max? It may not be much and you can repair the problem yourself, but if in doubt it is better to check before a larger troubles occurs. It is with this in mind that we have decided to compose this content and allow you to locate the problem and find a treatment. We will, through different steps review all the elements that can generate noises at the front right of your Ford S-max. 
What are the components that can cause front right noise Ford S-max?
Most of our job will focus on finding the part that gives your Ford S-max front wheel noise. The following is a list of the elements that are most likely to be producing it and how to verify it.
Grinding noise front right wheel Ford S-max : the shock absorber cup
One of the most likely causes of symptoms on your Ford S-max front right wheel noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its purpose and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, consider replacing them promptly as this may damage other parts and necessitate more pricey repairs.
Noise while turning front right Ford S-max : stabilizer bar
If you know a noise when turning on your front right wheel Ford S-max at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the composents of your stabilizer bar that is defective. To verify the source of the problem, you may find a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Furthermore, you can put yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front right noise when turning Ford S-max : direction triangles
Finally, you may have a noise in the front right wheel on your Ford S-max, when you accelerate, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud knocking or grinding noise front right Ford S-max : bearings
One of the other likely causes of symptoms of the front right grinding or knocking noise on your Ford S-max, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them promptly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noises on Ford S-max, you will certainly find a solution to your problem.
Front right wheel noise squeaking Ford S-max : cardan shaft
One of the most traditional causes when noise happens on the front right of your Ford S-max when you turn with your car is connected to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Ford S-max, do not hesitate to consult this article to find the solution to your problem.
