Occasionally your automobile can generate sounds in the front right, you are very rarely reassured by this kind of noise and you directly start to think that you will loose a wheel or that the repair will cost you an huge sum. Then, what if you identify a noise coming from the front right of your Alfa Romeo Mito? It may not be much and you can correct the issue yourself, but if in doubt it is better to check before a larger troubles happens. It is with this in mind that we have decided to make this document and allow you to find the issue and find a solution. We will, through some steps review all the elements that can create noises at the front right of your Alfa Romeo Mito. 
What are the elements that can cause front right noise Alfa Romeo Mito?
Most of our article will focus on finding the element that gives your Alfa Romeo Mito front wheel noise. The following is a list of the parts that are most likely to be causing it and how to confirm it.
Grinding noise front right wheel Alfa Romeo Mito : the shock absorber cup
One of the most classic causes of symptoms on your Alfa Romeo Mito front right wheel noise is advanced wear and tear on your shock unit. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its job and during small jolts that compress the suspension systems. To check if this is the issue that worries you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, think about swapping them as soon as possible as this may damage other parts and necessitate more expensive repairs.
Noise while turning front right Alfa Romeo Mito : stabilizer bar
If you know a noise when turning on your front right wheel Alfa Romeo Mito at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely related to one of the elements of your stabilizer bar that is defective. To confirm the source of the issue, you may experience a lack of balance in the direction of the vehicle (it pulls to the right or it pulls to the right). Additionally, you can put yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front right noise when turning Alfa Romeo Mito : direction triangles
Finally, you may have a noise in the front right wheel on your Alfa Romeo Mito, when you are accelerating, brake or at any other random moment. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud knocking or grinding noise front right Alfa Romeo Mito : bearings
One of the other likely causes of symptoms of the front right grinding or knocking noise on your Alfa Romeo Mito, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So remember to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them as soon as possible. If, on the other hand, this noise only shows up with an engaged speed, consult our article on loud noises on Alfa Romeo Mito, you will probably find a response to your issue.
Front right wheel noise squeaking Alfa Romeo Mito : cardan shaft
One of the most traditional causes when noise shows up on the front right of your Alfa Romeo Mito when you turn with your vehicle is related to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Alfa Romeo Mito, do not hesitate to consult this article to find the solution to your problem.
