On occasion your car can generate sounds in the front right, you are very certainly not reassured by this kind of noise and you straightaway start to think that you will loose a wheel or that the fix will cost you an astronomical sum. Thus, what if you detect a noise coming from the front right of your Nissan Micra 5? It may not be much and you can repair the issue yourself, but if in doubt it is better to verify before a larger damage occurs. It is with this in mind that we have chosen to compose this article and allow you to find out the issue and find a solution. We will, through several steps review all the components that can produce noises at the front right of your Nissan Micra 5. 
What are the parts that can cause front right noise Nissan Micra 5?
Most of our job will concentrate on finding the element that gives your Nissan Micra 5 front wheel noise. The following is a list of the elements that are most likely to be producing it and how to confirm it.
Grinding noise front right wheel Nissan Micra 5 : the shock absorber cup
One of the most classic reason of symptoms on your Nissan Micra 5 front right wheel noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its task and during small jolts that compress the suspension systems. To verify if this is the issue that concerns you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and necessitate more pricey repairs.
Noise while turning front right Nissan Micra 5 : stabilizer bar
If you detect a noise when turning on your front right wheel Nissan Micra 5 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the composents of your stabilizer bar that is defective. To confirm the source of the issue, you may experience a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). In addition, you can position yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front right noise when turning Nissan Micra 5 : direction triangles
Finally, you may have a noise in the front right wheel on your Nissan Micra 5, when you accelerate, brake or at any other random moment. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your technician.
Loud knocking or grinding noise front right Nissan Micra 5 : bearings
One of the other probable causes of symptoms of the front right grinding or knocking noise on your Nissan Micra 5, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, refer to our article on loud noises on Nissan Micra 5, you will most certainly find an answer to your issue.
Front right wheel noise squeaking Nissan Micra 5 : cardan shaft
One of the most common causes when noise shows up on the front right of your Nissan Micra 5 when you turn with your vehicle is linked to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Nissan Micra 5, do not hesitate to consult this article to find the solution to your problem.
