In some cases your automobile can produce sounds in the front right, you are very rarely reassured by this kind of noise and you instantly start to think that you will loose a wheel or that the repair will cost you an astronomical amount. Thus, what if you discern a noise coming from the front right of your Nissan Micra 4? It may not be much and you can fix the problem yourself, but if in doubt it is better to check before a larger troubles happens. It is with this in mind that we have decided to produce this article and allow you to find the problem and find a treatment. We will, through some steps review all the elements that can create noises at the front right of your Nissan Micra 4. 
What are the parts that can generate front right noise Nissan Micra 4?
Most of our job will concentrate on finding the part that gives your Nissan Micra 4 front wheel noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Grinding noise front right wheel Nissan Micra 4 : the shock absorber cup
One of the most classic causes of symptoms on your Nissan Micra 4 front right wheel noise is advanced wear and tear on your shock unit. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the problem that worries you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, think about changing them quickly as this may affect other parts and require more costly repairs.
Noise while turning front right Nissan Micra 4 : stabilizer bar
If you detect a noise when turning on your front right wheel Nissan Micra 4 at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the elements of your stabilizer bar that is defective. To verify the origin of the problem, you may find a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Also, you can position yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front right noise when turning Nissan Micra 4 : direction triangles
Finally, you may have a noise in the front right wheel on your Nissan Micra 4, when you are accelerating, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud knocking or grinding noise front right Nissan Micra 4 : bearings
One of the other possible causes of symptoms of the front right grinding or knocking noise on your Nissan Micra 4, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only happens with an engaged speed, read our article on loud noises on Nissan Micra 4, you will surely find a solution to your problem.
Front right wheel noise squeaking Nissan Micra 4 : cardan shaft
One of the most traditional causes when noise happens on the front right of your Nissan Micra 4 when you turn with your car is connected to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Nissan Micra 4, do not hesitate to consult this article to find the solution to your problem.
