If you encounter a noise on your car, you are right to be concerned about it and take it seriously, although it is possible that nothing major will happen from it, it is also conceivable that it is the first signal of a more significant service. A noise that appears on a door of your Toyota Sequoia fortunately signifies a slight change / repair, instead of a complicated repair. In order to help you in your procedure, we have chosen to write this article to provide you the most likely possibilities to your trouble. First, we will look at the different source noises of air in the door of your Toyota Sequoia, then hinge noises and finally at other possible possibilities.
Door air noise Toyota Sequoia
Plastic air cache noise
If you encounter air noise on the doors of your Toyota Sequoia, it is plausible that it is linked to some plastic covers on the inside side panels of your door. These can come loose, hole, fall and thus develop an air intake that will inevitably make a significant and unpleasant air noise in the passenger compartment. To ensure that you don’t have this problem on your Toyota Sequoia, open your doors and inspect the sides of them carefully, see if all the covers are properly placed.
Air noise seal
Air noise at the doors of your Toyota Sequoia can also be connected to a gasketfailing or overused. Indeed, the door seal, in addition to have a preventive purpose against moisture infiltration, also has a protective role for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer provide a perfect seal between the door and the car body. To verify its state, there are two methods, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water penetrates. If you are in this case, go to your auto mechanic to have your seal swapped and the door noise on your Toyota Sequoia adjusted.
Hinge noise door hinge Toyota Sequoia
Door noise Toyota Sequoia, dry hinge
It is also possible, based on the type of sound you experience, that your hinge is at the origin of them. If this is the case, you will have to verify it by opening your door and checking that the door noise on your Toyota Sequoia comes from a hinge that is too dry. To solve this trouble, first try to grease the hinge, in most cases this is enough to resolve your problem.
Noise porte Toyota Sequoia, worn hinge
If you have followed our initial advice referring to your hinge, but the problem still persists, it is conceivable that your hinge is worn out and necessitates a swap. In this circumstance, verify that despite the lubrication it still makes a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this Toyota Sequoia noise is your problem, change your hinge.
Other possibilities
Internal part of the broken window regulator
In the other possibilities that can provoke door noise on Toyota Sequoia, we can first think of the window lift, actually, after the hinge, it is the second complex mechanism of the door. If broken, it can create vibration or even air noise. To verify its state, remove the door trim and check that no parts are broken.
unscrewed speaker
Finally, one of the last plausible alternatives for Toyota Sequoia door noise would come from a from your vehicle’s speakers. In fact, they take place in the door and can, over time, loosen and generate a distinctive vibration and risk damaging themselves if you do not secure them again. Same process, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this document, don’t hesitate to take your vehicle to your auto mechanic who can look at your car in more detail to discover what the particular problem is that you know.
