It is never enjoyable to notice new sounds on your vehicle. We generally will be anxious and think about the worst. But experiencing wheel noise on Opel Vivaro is very often relating to small problems that you can easily fix. To support you in this investigation, our team decided to create this paper to make your life easier and support you in this process. To do this, we will alternately see what are the distinctive noises that Opel Vivaro wheels can induce and to which malfunctions they are linked.
The different wheel noises on Opel Vivaro and their sources
We will therefore look into the different types of sound you may experience and their sources.
I experience grinding wheel noise on Opel Vivaro from, cardan shaft
The first situation of grinding wheel noise on your Opel Vivaro is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may experience this sound when you pass over speed bumps. You should listen to a noise close to a cracking . It is quite possible in this situation that one or more bellows of your gimbals are dead. In this situation, the joint must be injured and the transmission may fail. Check the condition of the joint bellows and swap them if required or risk having your vehicle immobilized. If they have holes, they will fairly quickly dry out and fill with dust or stones that will promptly affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, read this article about suspension noise on Opel Vivaro to support you find a solution.
I hear a wheel noise Opel Vivaro when coasting caused by a bearing
One of the other potential origins of symptoms on the front wheel of your Opel Vivaro when coasting, may be that one of your bearing is tired, it will tend to make a thumping sound that intensifies when it is stressed (turns faster and faster). So make sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them very quickly. If, on the other hand, this noise only shows up itself with an engaged speed, read this article about loud noises on Opel Vivaro, you will most likely find a solution to your issue.
I perceive a wheel noise Opel Vivaro caused by brakes
If you listen to noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will create a loud metallic sound that you will inevitably notice. To verify this, put your vehicle on axle stands, and check the condition of your discs and pads by getting rid of the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you experience a metallic noise from your Opel Vivaro, but the brakes are not the cause, read this article for more information on this issue.
I notice a wheel noise Opel Vivaro due to faulty wheel alingment
If you experience a sound that may look like a vibration and will accentuate as you increase speed, it is possible that your wheel alingment or balancing is the reason of it. Wheel alingment of a vehicle is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Opel Vivaro. Verify that your seals are still in place, otherwise go to your garage.
I listen to a wheel noise Opel Vivaro due to wishbone
Finally, you may notice a noise on your Opel Vivaro at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your mechanic.
