It is never pleasant to perceive new sounds on your automobile. We always will worry and think about the most extreme. But experiencing wheel noise on Fiat Panda is very often related to small issue that you can easily eliminate. To support you in this investigation, our team decided to write this paper to make your life easier and support you in this task. To do this, we will alternately see what are the distinctive noises that Fiat Panda wheels can cause and to which malfunctions they are associated.
The diverse wheel noises on Fiat Panda and their origins
We will therefore look at the different types of sound you may feel and their triggers.
I hear grinding wheel noise on Fiat Panda from, cardan shaft
The first situation of grinding wheel noise on your Fiat Panda is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also plausible that you may feel this sound when you pass over speed bumps. You should feel a noise close to a cracking . It is quite plausible in this case that one or more bellows of your gimbals are out of date. In this case, the joint must be injured and the transmission may fail. Check the condition of the joint bellows and change them if required or risk having your automobile immobilized. If they have holes, they will fairly quickly dry out and fill with dust or stones that will very fast affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, browse this article about suspension noise on Fiat Panda to support you find a solution.
I acknowledge a wheel noise Fiat Panda when coasting due to a bearing
One of the other possible origins of signs on the front wheel of your Fiat Panda when coasting, may be that one of your bearing is good to be replaced, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So make sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case change it or them before long. If, on the other hand, this noise only shows up itself with an engaged speed, browse this article about loud noises on Fiat Panda, you will most likely find a solution to your trouble.
I listen to a wheel noise Fiat Panda due to brakes
If you listen to noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will generate a loud metallic sound that you will surely feel. To check this, put your automobile on axle stands, and examine the condition of your discs and pads by getting rid of the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Fiat Panda, but the brakes are not the cause, browse this article for more information on this trouble.
I perceive a wheel noise Fiat Panda caused by faulty wheel alingment
If you feel a sound that may be like a vibration and will intensify as you increase speed, it is plausible that your wheel alingment or balancing is the cause of it. Wheel alingment of a automobile is a major step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Fiat Panda. Check that your seals are still in position, otherwise go to your mechanic.
I experience a wheel noise Fiat Panda attributable to wishbone
Finally, you may notice a noise on your Fiat Panda at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the trigger of this trouble comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto mechanic.