It is never enjoyable to hear new sounds on your car. We always tend to be anxious and think about the most severe. But experiencing wheel noise on Volkswagen T-roc is very often linked to small problems that you can easily eliminate. To support you in this inspection, our team decided to produce this content page to make your life easier and support you in this process. To do this, we will alternately see what are the distinctive noises that Volkswagen T-roc wheels can induce and to which failures they are associated.
The different wheel noises on Volkswagen T-roc and their sources
We will therefore look at the different types of sound you may feel and their sources.
I hear grinding wheel noise on Volkswagen T-roc from, cardan shaft
The first situation of grinding wheel noise on your Volkswagen T-roc is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may feel this sound when you pass over speed bumps. You should notice a noise close to a cracking . It is quite possible in this case that one or more bellows of your gimbals are dead. In this situation, the joint must be weakened and the transmission may fail. Check the state of the joint bellows and swap them if necessary or risk having your car immobilized. If they have holes, they will very fast dry out and fill with dust or stones that will quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the origin of it, browse this guide about suspension noise on Volkswagen T-roc to support you find a solution.
I find out a wheel noise Volkswagen T-roc when coasting connected to a bearing
One of the other probable causes of signs on the front wheel of your Volkswagen T-roc when coasting, may be that one of your bearing is nearly dead, it will tend to make a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only shows up itself with an engaged speed, browse this guide about loud noises on Volkswagen T-roc, you will most likely find a solution to your issue.
I hear a wheel noise Volkswagen T-roc connected to brakes
If you experience noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will make a loud metallic sound that you will obviously feel. To verify this, put your car on axle stands, and verify the state of your discs and pads by taking out the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you feel a metallic noise from your Volkswagen T-roc, but the brakes are not the cause, browse this guide for more details on this issue.
I listen to a wheel noise Volkswagen T-roc connected to faulty wheel alingment
If you feel a sound that may look like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is involved. Wheel alingment of a car is a fundamental step that is generally done after each tire swap. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Volkswagen T-roc. Verify that your seals are still set up, otherwise go to your mechanic.
I hear a wheel noise Volkswagen T-roc caused by wishbone
Finally, you may notice a noise on your Volkswagen T-roc at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone when you accelerate when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.
