It is never pleasurable to perceive a noise from your car you don’t know where from. So what if you discover a serpentine belt noise that persists on your Peugeot Boxer 2? It is very possible that this is a insignificant issue, but before being sure, it is better to accomplish some checks. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you locating and repairing it. First, we will look at the serpentine belt noises on your Peugeot Boxer 2 and then we will check out the origins of these sounds.
I encounter noises from serpentine belt Peugeot Boxer 2
The best strategy to check the state of your belts is to listen to your vehicle. Immediately after you recognise sounds such as squealing or bells, you should take a closer look to check their source. The function of the serpentine belt or driving belt of your Peugeot Boxer 2 is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I perceive squealing noises on my serpentine belt Peugeot Boxer 2
This type of squealing belt noises on Peugeot Boxer 2, which will often be acute, can usually occur when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be significant and it is normally quite simple to connect it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to identify a belt noise on your Peugeot Boxer 2. The cause of this issue can be connected to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this event is annodine. As the serpentine belt of your Peugeot Boxer 2 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to check the state of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I perceive loud serpentine or driving belt noises Peugeot Boxer 2
Just like squealing, a driving belt noise on your Peugeot Boxer 2 that sounds like a loud grinding sound can tell you a lot about its state. It is therefore necessary that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Don’t forget to check first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to change the tensioner or pulley.
I perceive bearing noises on the serpentine belt of my Peugeot Boxer 2
Finally, if in your case you identify a bearing belt noise on Peugeot Boxer 2, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Peugeot Boxer 2 which could maybe help you.
