It is never enjoyable to listen to a noise from your car you don’t know where from. Then what if you detect a serpentine belt noise that stays on your Peugeot 306? It is highly possible that this is a insignificant issue, but before being sure, it is better to conduct some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you locating and fixing it. First, we will look at the serpentine belt noises on your Peugeot 306 and then we will check out the sources of these sounds.
I experience noises from serpentine belt Peugeot 306
The best strategy to control the state of your belts is to listen to your automobile. As soon as you perceive sounds such as squealing or bells, you should take a closer look to check their origin. The job of the serpentine belt or driving belt of your Peugeot 306 is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I listen to squealing noises on my serpentine belt Peugeot 306
This kind of squealing belt noises on Peugeot 306, which will often be acute, can in most cases happen when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be heavy and it is normally quite simple to relate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to spot a belt noise on your Peugeot 306. The reason of this issue can be connected to the damper pulley, which operates as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this phenomenon is annodine. As the serpentine belt of your Peugeot 306 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to check the state of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Peugeot 306
Just like squealing, a driving belt noise on your Peugeot 306 that sounds like a loud grinding sound can tell you a lot about its state. It is therefore important that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Remember to check first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to swap the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Peugeot 306
Finally, if in your case you recognize a bearing belt noise on Peugeot 306, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Peugeot 306 which could maybe help you.
