It is never relaxing to notice a noise from your car you don’t know where from. Thus what if you notice a serpentine belt noise that stays on your Peugeot 206 ? It is extremely possible that this is a insignificant issue, but before being sure, it is better to execute some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a content to support you finding and correcting it. First, we will look at the serpentine belt noises on your Peugeot 206 and then we will take a look at the sources of these noises.
I encounter noises from serpentine belt Peugeot 206
The best strategy to control the condition of your belts is to listen to your automobile. Immediately after you perceive noises such as squealing or bells, you should take a closer look to verify their source. The job of the serpentine belt or driving belt of your Peugeot 206 is to transmit the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal operation of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine elements at variable speeds.
I notice squealing noises on my serpentine belt Peugeot 206
This type of squealing belt noises on Peugeot 206 , which will often be acute, can commonly arise when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be heavy and it is normally quite simple to associate it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to locate a belt noise on your Peugeot 206 . The cause of this issue can be connected to the damper pulley, which acts as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this event is annodine. As the serpentine belt of your Peugeot 206 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to verify the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Peugeot 206
Just like squealing, a driving belt noise on your Peugeot 206 that sounds like a loud grinding sound can say a lot about its condition. It is therefore necessary that you look further and find the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Remember to verify first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to change the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Peugeot 206
Finally, if in your case you recognize a bearing belt noise on Peugeot 206 , it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Peugeot 206 which could maybe help you.
