It is never pleasing to perceive a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that remains on your Peugeot Rifter? It is highly possible that this is a unimportant problem, but before being sure, it is better to conduct some investigations. If this belt noise comes from your serpentine or driving belt, our team has written an article to support you locating and solving it. First, we will look at the serpentine belt noises on your Peugeot Rifter and then we will look at the origins of these noises.
I encounter noises from serpentine belt Peugeot Rifter
The best technique to control the state of your belts is to listen to your car. Immediately after you perceive noises such as squealing or bells, you should take a closer look to check their source. The job of the serpentine belt or driving belt of your Peugeot Rifter is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal overall performance of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I perceive squealing noises on my serpentine belt Peugeot Rifter
This sort of squealing belt noises on Peugeot Rifter, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be significant and it is often quite simple to link it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to locate a belt noise on your Peugeot Rifter. The cause of this problem can be in connection with the damper pulley, which acts as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Peugeot Rifter is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to check the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I perceive loud serpentine or driving belt noises Peugeot Rifter
Just like squealing, a driving belt noise on your Peugeot Rifter that sounds like a loud grinding sound can say a lot about its state. It is therefore important that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Don’t forget to check first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to replace the tensioner or pulley.
I perceive bearing noises on the serpentine belt of my Peugeot Rifter
Finally, if in your case you discern a bearing belt noise on Peugeot Rifter, it is possible that it is in connection with a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on Peugeot Rifter which could maybe help you.
