If you notice a noise on your car, you are right to get worried about this and take it seriously, although it is possible that nothing significant will result from it, it is also imaginable that it is the first indication of a more significant repair. A noise that appears on a door of your Dodge Caliber fortunately reveals a slight correction / repair, instead of a complex repair. In order to help you in your approach, we have chosen to compose this article to provide you the most likely possibilities to your trouble. 1st, we will examine the different origin noises of air in the door of your Dodge Caliber, then hinge noises and finally at other possible possibilities.
Door air noise Dodge Caliber
Plastic air cache noise
If you encounter air noise on the doors of your Dodge Caliber, it is possible that it is linked to some plastic covers on the inside side panels of your door. These can come loose, hole, fall and thus create an air intake that will obviously generate a significant and annoying air noise in the passenger compartment. To validate that you don’t have this trouble on your Dodge Caliber, open your doors and inspect the sides of them carefully, see if all the covers are properly installed.
Air noise seal
Air noise at the doors of your Dodge Caliber can also be related to a gasketfailing or overused. Certainly, the door seal, in addition to have a protecting role against moisture infiltration, also has a protective task for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer give a perfect seal between the door and the car body. To examine its condition, there are two options, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water goes in. If you are in this case, go to your auto mechanic to have your seal changed and the door noise on your Dodge Caliber adjusted.
Hinge noise door hinge Dodge Caliber
Door noise Dodge Caliber, dry hinge
It is also possible, in accordance with the type of noise you know, that your hinge is at the origin of them. If this is the case, you will have to examine it by opening your door and checking that the door noise on your Dodge Caliber comes from a hinge that is too dry. To correct this trouble, first try to grease the hinge, in most cases this is sufficient to fix your trouble.
Noise porte Dodge Caliber, worn hinge
If you have followed our initial advice relating to your hinge, but the trouble still continues, it is plausible that your hinge is worn out and necessitates a swap. In this case, examine that despite the lubrication it still creates a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this Dodge Caliber noise is your problem, change your hinge.
Other possibilities
Internal part of the damaged window regulator
In the other possibilities that can generate door noise on Dodge Caliber, we can first think of the window lift, in fact, after the hinge, it is the second advanced mechanism of the door. If broken, it can provoke vibration or even air noise. To examine its condition, remove the door trim and check that no parts are broken.
unscrewed speaker
Finally, one of the last possible scenarios for Dodge Caliber door noise would come from a from your vehicle’s speakers. Indeed, they take place in the door and can, over time, loosen and generate a heavy vibration and risk damaging themselves if you do not fix them again. Same method, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this document, don’t hesitate to take your vehicle to your auto mechanic who can check your car in more detail to discover what the particular trouble is that you know.
