It is never enjoyable to notice a noise from your car you don’t know where from. Thus what if you locate a serpentine belt noise that remains on your Kia Rio 3? It is very conceivable that this is a minor trouble, but before being sure, it is better to accomplish some checks. If this belt noise comes from your serpentine or driving belt, our team has written a document to help you locating and solving it. First, we will look at the serpentine belt noises on your Kia Rio 3 and then we will check out the sources of these noises.
I encounter noises from serpentine belt Kia Rio 3
The best method to check the condition of your belts is to listen to your automobile. Immediately after you find noises such as squealing or bells, you should take a closer look to verify their origin. The task of the serpentine belt or driving belt of your Kia Rio 3 is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine parts at variable speeds.
I notice squealing noises on my serpentine belt Kia Rio 3
This kind of squealing belt noises on Kia Rio 3, which will often be acute, can usually arise when the engine is cold, or when the acceleration increases in intensity. . This kind of sound must be heavy and it is obviously quite simple to associate it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to locate a belt noise on your Kia Rio 3. The reason of this trouble can be related to the damper pulley, which functions as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this phenomenon is annodine. As the serpentine belt of your Kia Rio 3 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to verify the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Kia Rio 3
Just like squealing, a driving belt noise on your Kia Rio 3 that sounds like a loud grinding sound can tell you a lot about its condition. It is therefore imperative that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Don’t forget to verify first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to swap the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Kia Rio 3
Finally, if in your case you identify a bearing belt noise on Kia Rio 3, it is conceivable that it is related to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Kia Rio 3 which could maybe help you.