It is never relaxing to listen to a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that remains on your Audi R8? It is highly possible that this is a insignificant problem, but before being sure, it is better to conduct some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you finding and solving it. First, we will look at the serpentine belt noises on your Audi R8 and then we will check out the sources of these sounds.
I feel noises from serpentine belt Audi R8
The best strategy to check the condition of your belts is to listen to your vehicle. Immediately after you perceive sounds such as squealing or bells, you should take a closer look to examine their origin. The task of the serpentine belt or driving belt of your Audi R8 is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal general performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine parts at variable speeds.
I listen to squealing noises on my serpentine belt Audi R8
This type of squealing belt noises on Audi R8, which will often be acute, can mostly occur when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be significant and it is obviously quite simple to associate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too difficult for you to locate a belt noise on your Audi R8. The reason of this problem can be linked to the damper pulley, which acts as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your Audi R8 is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Audi R8
Just like squealing, a driving belt noise on your Audi R8 that sounds like a loud grinding sound can say a lot about its condition. It is therefore important that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Remember to examine first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to change the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Audi R8
Finally, if in your case you discern a bearing belt noise on Audi R8, it is possible that it is linked to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still detect a belt noises, read our article about timing belt noises on Audi R8 which could maybe help you.
