When you discover unusual noises on your Renault Laguna 2 you usually tend to stress. Specifically when you experience a noise coming from the release bearing of your Renault Laguna 2. It is immediately assimilated to an engine issue and can therefore be serious. As we know that you do not take these problems lightly, we have decided to create this content page to help you find the triggers and free yourself from this matter as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Renault Laguna 2 and their origins.
What is the purpose and operation of the release bearing on Renault Laguna 2?
Task of the release bearing on Renault Laguna 2
The release bearing of your Renault Laguna 2 has a major purpose in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Renault Laguna 2.
Function of release bearing Renault Laguna 2
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different sort of release bearing Renault Laguna 2 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two sort of release bearing . This one, contrary to the hydraulic version, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the kind most used in contemporary cars. It is however more sophisticated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Renault Laguna 2 and their origins
I experience a release bearing noise on Renault Laguna 2 every time I drive and it stops when I release my clutch pedal
If you experience a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which case it is time to change the release bearing of your Renault Laguna 2.
I experience a release bearing noise when my pedal is up and I experience jolts in my foot
If you experience too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can experience in your clutch pedal, then the stop/fork release/blades grouping is degraded. In fact, this noise often comes from the broken fork that no longer allows the system to run normally.
I experience a grinding noise coming from the release bearing of my Renault Laguna 2 when I try to shift gears and they do not shift
This matter appears most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Renault Laguna 2, then you probably have a leak coming from your release bearing. It must therefore be swapped promptly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Renault Laguna 2 and it’s not from your release bearing, check this article to have more informations.
