When you observe unusual noises on your Ford Mondeo you commonly tend to be concerned. Specifically when you encounter a noise coming from the release bearing of your Ford Mondeo. It is immediately assimilated to an engine trouble and can therefore be serious. As we know that you do not take these concerns lightly, we have decided to write this content page to help you locate the triggers and free yourself from this concern as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Ford Mondeo and their sources.
What is the task and operation of the release bearing on Ford Mondeo?
Function of the release bearing on Ford Mondeo
The release bearing of your Ford Mondeo has a fundamental purpose in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Ford Mondeo.
Function of release bearing Ford Mondeo
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct kind of release bearing Ford Mondeo :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, compared with the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the type most used in modern cars. It is however more elaborate than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Ford Mondeo and their sources
I encounter a release bearing noise on Ford Mondeo every time I drive and it stops when I release my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the cause. Make sure that this noise stops when you disengage, in which circumstance it is time to replace the release bearing of your Ford Mondeo.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the system to run normally.
I encounter a grinding noise coming from the release bearing of my Ford Mondeo when I try to shift gears and they do not shift
This concern arises most often on models equipped with hydraulic release bearing. It is often related to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Ford Mondeo, then you probably have a leak coming from your release bearing. It must therefore be changed promptly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Ford Mondeo and it’s not from your release bearing, check this article to have more informations.
