When you discover unusual noises on your Volkswagen California you usually tend to get worried. Specifically when you feel a noise coming from the release bearing of your Volkswagen California. It is instantly assimilated to an engine problem and can therefore be serious. As we know that you do not take these problems lightly, we have chosen to write this article content to support you find the triggers and free yourself from this concern as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Volkswagen California and their sources.release-bearing-noise-volkswagen-california

What is the task and operation of the release bearing on Volkswagen California?

Function of the release bearing on Volkswagen California

The release bearing of your Volkswagen California has a fundamental purpose in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Volkswagen California.

Function of release bearing Volkswagen California

Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (depending on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different types of release bearing Volkswagen California :

  • Pulled release bearing
  • It is the most unconventional of the two types of release bearing . This one, as opposed to the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.

  • Hydraulic release bearing
  • The hydraulic release bearing, although more technical, is the type most used in modern vehicles. It is however more elaborate than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
    More conventional clutch stop

Release bearing noises Volkswagen California and their sources

I feel a release bearing noise on Volkswagen California in cases where I drive and it stops when I depress my clutch pedal

If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the cause. Make sure that this noise stops when you disengage, in which situation it is time to change the release bearing of your Volkswagen California.

I feel a release bearing noise when my pedal is up and I feel jolts in my foot

If you feel too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the device to work normally.

I feel a grinding noise coming from the release bearing of my Volkswagen California when I try to shift gears and they do not shift

This concern shows up most often on models equipped with hydraulic release bearing. It is often related to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Volkswagen California, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Volkswagen California and it’s not from your release bearing, check this article to have more informations.