When you observe unusual noises on your Renault Megane you usually tend to worry. Especially when you encounter a noise coming from the release bearing of your Renault Megane. It is instantly assimilated to an engine trouble and can therefore be serious. As we know that you do not take these concerns lightly, we have chosen to make this document to support you locate the causes and free yourself from this issues as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Renault Megane and their sources.
What is the task and operation of the release bearing on Renault Megane?
Purpose of the release bearing on Renault Megane
The release bearing of your Renault Megane has a essential purpose in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Renault Megane.
Function of release bearing Renault Megane
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (depending on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct kind of release bearing Renault Megane :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, in contrast to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the type most used in modern automobiles. It is however more complicated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Renault Megane and their sources
I encounter a release bearing noise on Renault Megane once I drive and it stops when I depress my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly plausible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which situation it is time to swap the release bearing of your Renault Megane.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is deteriorated. In fact, this noise often comes from the broken fork that no longer allows the device to run normally.
I encounter a grinding noise coming from the release bearing of my Renault Megane when I try to shift gears and they do not shift
This issues appears most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Renault Megane, then you probably have a leak coming from your release bearing. It must therefore be replaced quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Renault Megane and it’s not from your release bearing, check this article to have more informations.
