What can be more disturbing than noises when you start your vehicle… Indeed, you probably previously noticed noises when you start your Peugeot e-2008 and in general it’s frustrating. It may not be anything critical, but each new engine starts usually becomes a scary moment during which you don’t know if your engine will start. That is why our editorial staff has made the decision to write this article to support you find its origin. To do this, first, we will see the case of noise when starting on Peugeot e-2008 but the vehicle does not start, and finally, the noise you can encounter on your vehicle if it starts, first cold and then hot.
I experience a noise when I try to start my Peugeot e-2008, but the engine doesn’t start
I detect a clicking noise at the start of my Peugeot e-2008
If you experience a noise when you want to start your vehicle, and it does not want to turn on, it is likely that it is the battery that is triggering the trouble. Indeed, if you listen clicking noise when you start your Peugeot e-2008, and it sounds like a ticking, you almost certainly lack the energy to run your starter, test your battery with a voltmeter and replace it if required. In the event that after examining your battery, you still experience a noise when starting your Peugeot e-2008 and it does not want to start, refer to this article content about starter motor noises on Peugeot e-2008 for more information and to find the origin of your trouble.
I listen a noise when I start my Peugeot e-2008 but the engine it starts
I experience a noise when I start my Peugeot e-2008
- Grinding or squealing type noises when I start cold Peugeot e-2008 :
If you experience a noise when you start your Peugeot e-2008, and this noise is like grinding or squealing noise, which can also be relating to vibrations, it is plausible that it is the combustion of your vehicle that is involved. Indeed if you have an air/fuel mixture that is not good the normal performance of the engine will be altered. Check the state of your injectors and air intake system. For more information on the origins of injection-related noises on Peugeot e-2008, see this content page. - Cold start friction parts Peugeot e-2008 :
If you know cold friction noises on Peugeot e-2008, it is practically certain that they come from one of your belts. Either the serpentine belt starts to wear out and therefore triggers a friction noise. It is also plausible that the tensioner roller or damper pulley is worn out and that as a result the extension belt causes a friction noise, often when cold. Visually examine your belt and replace it if needed. If you have other friction noises, and it doesn’t come from your serpentine belt, we have a full article content on engine of your Peugeot e-2008.
I experience a noise when starting my Peugeot e-2008 even when hot
- rubber mount / silent bloc dead motor
If you experience a clacking noise just as you start your car’s engine and it is more than 100,000 km long, it is plausible that some of your engine silentblocks or rubber mounts are dead. And the huge vibrations produced by starting the engine can make starting noise on Peugeot e-2008. Check their state and change them if needed. Read this article content if you would like to have detailed information on rubber mount noises on Peugeot e-2008. - Motor flywheel
Finally, if you discern a noise that sounds a little like a crank noise when you start your Peugeot e-2008, even when hot, it is plausible that if your series is equipped with a dual-mass flywheel, it is the origin of your problems. Indeed, these parts have created a lot of problems on many automobiles. When they take part in the game they generate noise when you start your Peugeot e-2008 and when you turn off the engine. Have his state inspected by a professional.
