Listening noises from your car is never satisfying. Specifically persistent noises such as rubbing noises on Peugeot 208 that will disturb you and prevent you from driving in the regular quiet environment that your car gives you. If you experience rubbing noise on Peugeot 208, you are in the right place, our editorial staff has decided to create this content page to help you find the source and stop it. This is why, first of all, we will concentrate on the rubbing noises that can occur when you drive with your Peugeot 208, and secondly, the rubbing noises that come from your engine block.
I experience a rubbing noise on Peugeot 208 when I drive
Noise of rubbing from wheels
First, we will focus on rubbing noises that can be caused by wheel, be aware that in this article we will only examine the most common causes of rubbing noises on Peugeot 208 connected with your wheels, if you desire a complete guide on wheel noise on Peugeot 208, it’s here.
- Rubbing noise caused by your bearing
- Brake noise
One of the other most likely causes of rubbing noise symptoms on your Peugeot 208, may be that one of your bearing is tired, it will tend to generate a loud noise that goes up when stressed (turns faster and faster). So remember to verify by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well based here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on Ancre_loud_noise, you will most likely find a solution to your problem.
If you encounter a rubbing noise on Peugeot 208 and you have the feeling that it comes from your wheels, it is highly possible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the state of your discs and pads by taking out the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want informations about it, browse this guide for more information about brake noises on Peugeot 208.
Noise of rubbing from under the car
Finally, a rubbing noise on your Peugeot 208 from the lower part of the chassis may be connected to a poor attachment of your exhaust to your car. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In such a case, you must verify, when cold, that the exhaust holds well, to perform this try to make it move in different directions and watch how it responds. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is possible that a rubber mounts may have died . In cases like this it will have to be swapped. If your exhaust is the reason of this exhaust noise on Peugeot 208, but the silent blocks are not the reason, read this guide to find the reason.
I experience a rubbing noise on Peugeot 208 coming from the engine
If it is close to an engine noise rubbing on Peugeot 208, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and provoke this friction.So verify the state and try to find the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to arise in rpm, accelerate and position someone at the engine block to establish the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also take into account to verify the state of your belts, and swap them if required because it is the health of your car that is at stake. If you encounter belt noises on Peugeot 208, we advise that you read this content page for more info on this subject.
