Experiencing noises from your car is never satisfying. Especially constant noises such as rubbing noises on Peugeot 106 that will disturb you and prevent you from traveling in the regular quiet environment that your car provides you. If you discern rubbing noise on Peugeot 106, you are in the right place, our team has decided to write this article to support you locate the origin and stop it. This is why, first of all, we will look into the rubbing noises that can come out when you drive with your Peugeot 106, and secondly, the rubbing noises that come from your engine block.
I experience a rubbing noise on Peugeot 106 when I drive
Noise of rubbing from wheels
First, we will focus on rubbing noises that can be due to wheel, be aware that in this article content we will only check the most traditional triggers of rubbing noises on Peugeot 106 in connection with your wheels, if you desire a complete guide on wheel noise on Peugeot 106, it’s here.
- Rubbing noise coming from your bearing
- Brake noise
One of the other most likely triggers of rubbing noise manifestations on your Peugeot 106, may be that one of your bearing is tired, it will commonly produce a loud noise that increase when stressed (turns faster and faster). So remember to verify by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well located here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on Ancre_loud_noise, you will most likely find a remedy to your trouble.
If you hear a rubbing noise on Peugeot 106 and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the condition of your discs and pads by taking out the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want informations about it, browse this guide for more information about brake noises on Peugeot 106.
Noise of rubbing from under the car
Finally, a rubbing noise on your Peugeot 106 from the lower part of the chassis may be related to a poor attachment of your exhaust to your car. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In this case, you must verify, when cold, that the exhaust holds well, to do this try to make it move in different angles and observe how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is possible that a rubber mounts may have died . In this case it will have to be replaced. If your exhaust is the reason of this exhaust noise on Peugeot 106, but the silent blocks are not the reason, read this guide to find the reason.
I experience a rubbing noise on Peugeot 106 coming from the engine
If it is close to an engine noise rubbing on Peugeot 106, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and cause this friction.So check the condition and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to show up in rpm, accelerate and position someone at the engine block to establish the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also take into account to verify the condition of your belts, and swap them if needed because it is the health of your car that is at stake. If you encounter belt noises on Peugeot 106, we recommend that you consult this article for more details on this subject.
