Experiencing noises from your automobile is never pleasant. Specifically repeated noises such as rubbing noises on Hyundai Ix35 that will disturb you and prevent you from driving in the normal quiet environment that your automobile provides you. If you notice rubbing noise on Hyundai Ix35, you are in the right place, our team has decided to write this content to support you locate the origin and stop it. This is why, first of all, we will look at the rubbing noises that can show up when you drive with your Hyundai Ix35, and secondly, the rubbing noises that originate from your engine block.
I hear a rubbing noise on Hyundai Ix35 when I drive
Noise of rubbing from wheels
First, we will concentrate on rubbing noises that can be connected to wheel, be aware that in this content we will only investigate the most common causes of rubbing noises on Hyundai Ix35 in association with your wheels, if you need a complete guide on wheel noise on Hyundai Ix35, it’s here.
- Rubbing noise based on your bearing
- Brake noise
One of the other most likely causes of rubbing noise symptoms on your Hyundai Ix35, may be that one of your bearing is tired, it will commonly generate a loud noise that increases when stressed (turns faster and faster). So bear in mind to verify by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on Ancre_loud_noise, you will most likely find a remedy to your issue.
If you encounter a rubbing noise on Hyundai Ix35 and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To verify this, put your automobile on safety stand, and verify the state of your discs and pads by taking out the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your automobile, and you want informations about it, go through this guide for more details about brake noises on Hyundai Ix35.
Noise of rubbing from under the automobile
Finally, a rubbing noise on your Hyundai Ix35 from the lower part of the chassis may be connected to a poor attachment of your exhaust to your vehicle. In fact, over time, vibrations, the pot fasteners on the automobile chassis can come off. In this case, you must verify, when cold, that the exhaust holds well, to do this try to make it move in different angles and observe how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is possible that a rubber mounts may have died . In cases like this it will have to be changed. If your exhaust is the cause of this exhaust noise on Hyundai Ix35, but the silent blocks are not the reason, read this guide to find the cause.
I hear a rubbing noise on Hyundai Ix35 coming from the engine
If it is close to an engine noise rubbing on Hyundai Ix35, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and induce this friction.So check the state and try to find the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to happen in rpm, accelerate and position someone at the engine block to determine the area of origins of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also please remember to verify the state of your belts, and swap them if necessary because it is the health of your automobile that is at stake. If you encounter belt noises on Hyundai Ix35, we suggest that you browse this content for more info on this subject.
