Listening noises from your vehicle is never enjoyable. Especially constant noises such as rubbing noises on Hyundai Kona that will disturb you and prevent you from driving in the normal quiet environment that your vehicle gives you. If you discern rubbing noise on Hyundai Kona, you are in the right place, our editorial staff has decided to write this article to support you locate the source and stop it. This is why, first of all, we will look at the rubbing noises that can come out when you drive with your Hyundai Kona, and secondly, the rubbing noises that originate from your engine block.rubbing-noise-hyundai-kona

I perceive a rubbing noise on Hyundai Kona when I drive

Noise of rubbing from wheels

First, we will concentrate on rubbing noises that can be caused by wheel, be aware that in this content we will only investigate the most traditional triggers of rubbing noises on Hyundai Kona in connection with your wheels, if you want a complete report on wheel noise on Hyundai Kona, it’s here.

  • Rubbing noise based on your bearing
  • One of the other possible triggers of rubbing noise symptoms on your Hyundai Kona, may be that one of your bearing is tired, it will tend to make a loud noise that raises when stressed (turns faster and faster). So think about to verify by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well established here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide on Ancre_loud_noise, you will most likely find a solution to your problem.

  • Brake noise
  • If you encounter a rubbing noise on Hyundai Kona and you have the feeling that it comes from your wheels, it is highly possible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To verify this, put your vehicle on safety stand, and verify the state of your discs and pads by taking away the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your vehicle, and you want explications about it, browse this article for more info about brake noises on Hyundai Kona.

    Noise of rubbing from under the vehicle

    Finally, a rubbing noise on your Hyundai Kona from the lower part of the chassis may be connected to a poor attachment of your exhaust to your vehicle. In fact, over time, vibrations, the pot fasteners on the vehicle chassis can come off. In such a case, you must verify, when cold, that the exhaust holds well, to do this try to make it move in different ways and check out how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In such a case it will have to be replaced. If your exhaust is the cause of this exhaust noise on Hyundai Kona, but the silent blocks are not the reason, read this article to find the cause.

    I perceive a rubbing noise on Hyundai Kona coming from the engine

    If it is close to an engine noise rubbing on Hyundai Kona, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and trigger this friction.So check the state and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to occur in rpm, accelerate and position someone at the engine block to identify the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also please remember to verify the state of your belts, and change them if required because it is the health of your vehicle that is at stake. If you encounter belt noises on Hyundai Kona, we encourage that you consult this article for more information on this subject.