It is never enjoyable to hear a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you detect a reversing gear noise that remains on your Volkswagen Transporter? Any gearbox problem can be important, but before making sure, it is better to do a few investigations. Our team has created this content page to help you eliminate it. First, we will see what the sources and the different gearbox noises can be on Volkswagen Transporter, and second, what are the solutions available to you.
Classical reverse Volkswagen Transporter noises and some tips to maintain your gearbox
Why does the reversing of my Volkswagen Transporter make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise induced by the reversing of your Volkswagen Transporter is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will exert on the gears will be monumental and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you find out a reverse noise on your Volkswagen Transporter if you shift gear under these conditions.
Different Volkswagen Transporter reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the origin of reversing noise on Volkswagen Transporter. Here are the 3 typical sounds you may be victim of.
I find out a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Volkswagen Transporter, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this article for more information about strut mount noises on Volkswagen Transporter.
An increased reverse knocking noise on Volkswagen TransporterX
If you are subject to a knocking noise when you are in reverse with your Volkswagen Transporter and this noise tends to amplify as you gain speed. It is possible that you are confronting a serious problem that needs to be fixed fairly quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your automobile to your repair shop quickly or browse this document about gearbox noise on Volkswagen Transporter for more data.
I hear a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Transporter reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
